Two-component Rail 1700/A + 1720/A

Two-component anodised aluminium rail 1700/A + 1720/A for use with FLUID chassis from Terno Scorrevoli.

The rail is installed by first fixing the technical profile 1720/A to the wall and then inserting the profile for the chassis 1700/A into it , thus maintaining stability and an even gap between the wall and the door leaf.

The maximum possible leaf thickness is 30mm (using rail finishes 1380/AS). The gap between the wall and the door leaf is 9mm.

The rail can be 2m, 3m, 4mor 6m long.

The rail can be fitted with the 1380/AS rail trim.

The maximum weight of the door leaf is 120kg.

Tip: The length of the rail must be 2 times longer than the width of the door leaf. For example: if the leaf width is up to 1 metre, you will need a rail 2 metres long; if you have two doors sliding in opposite directions 1 metre each, you will need a 4 metre rail.