Door handles JNF IN.00.243

PVD coating - an additional layer of metal is deposited on the surface using steam. This is a coating technique carried out under high vacuum pressure by ion bombardment, vapour deposition and spray metallization. In other words, the basic principles of vacuum evaporation are: under vacuum conditions, the metal and metal alloys are evaporated and then deposited on the substrate surface. Evaporation is generally used to heat the resistance and the electron beam bombards the coating material to evaporate it into the gas phase and then deposited on the substrate surface. Historically, vacuum evaporation is the earliest technology used for PVD.

PVD coating has the following properties:

Extremely thin film thickness (1 to 3 microns);

High durability

Protects handles against scratches.

Manufactured without any impurities in the composition;

JNF Handles are designed for door leaf thicknesses of 38-44 mm. Mechanism reinforced with double metal self-levelling springs. Handles with thin 8 mm thick metal rosettes.

Included:

• Pair of handles - left and right; with 8 mm thick handle rosettes;
• 2 pcs of mounting rosettes (known as mounting adaptors);
• 8x8mm diameter handle bar;
• 2 pcs M4 grub screws;
• 2 hexagonal screws and a 3mm hexagonal key;
• assembly instructions.

If your door leaf is thicker than 44mm, you will need a thicker door installation kit, please leave relevant information in the order notes, including door leaf