Two-component Rail 1700/A + 1710/A

Two-component anodised aluminium rail 1700/A + 1710/A for use with FLUID chassis from Terno Scorrevoli.

The rail is installed by first fixing the technical profile 1710/A to the wall and then inserting the profile for the chassis 1700/A into it , thus maintaining stability and an even gap between the wall and the door leaf.

The maximum possible leaf thickness is 40mm (using 1380/AS rail finishes ) or 50mm (using 1480/AS finishes). The gap between the wall and the door leaf is 15.5mm and 10.5mm respectively.

The rail can be 2m, 3m, 4mor 6m long.

The rail can be used with the 1380/AS rail finish.

The maximum possible sash weight is 120kg.

Tip: The length of the rail must be 2 times longer than the width of the door leaf. For example: if the leaf width is up to 1 metre, you will need a rail 2 metres long; if you have two doors sliding in opposite directions, each 1 metre long, you will need a rail 4 metres long.