Wall Two-component track 1700 /A + 1710 /A

The two-component anodized aluminum rail 1700/A + 1710/A is designed to be equipped with Terno Scorrevoli's FLUID chassis.

The rail is installed by first fixing the technical profile 1710/A to the wall, and then inserting the chassis profile 1700/A into it, thus maintaining stability and an even gap between the wall and the door leaf.

The maximum possible sash thickness is 40 mm (using rail finishes 1380/AS) or 50 mm (using finishes 1480/AS). The gap between the wall and the door leaf is 15.5 mm and 10.5 mm, respectively.

The runner can be 2m, 3m, 4m or 6 meters long.

Rail finish 1380/AS can be used with the rail.

The maximum possible weight of the sash is 120 kg.

Tip: the length of the rail should be 2 times longer than the width of the door leaf. For example: if the width of the sash is up to 1 meter wide - you will need a 2 meter long rail; and if you hang two sliding doors in opposite directions, 1 meter each, you will need a 4-meter rail.