Handle JNF FLOW — black PVD

10 year warranty for handle cover

2 year warranty for handle mechanism

PVD coating – an additional layer of metal is deposited on the surface with the help of steam. It is a coating method performed in high pressure vacuum by ion bombardment, evaporation condensation and spray metallization. In other words, the basic principles of vacuum evaporation are: under vacuum conditions, metal and metal alloys are evaporated and then deposited on the surface of the substrate. The evaporation method is generally used to heat the resist, and an electron beam bombards the coating material to vaporize it into the gas phase and then deposit it on the substrate surface. Historically, vacuum evaporation is the earliest technology used in the PVD method.

PVD coating has the following properties:

• Extremely thin film thickness (from 1 to 3 microns);
• Has great longevity
• Protects the handles from scratches.
• Made without any impurities in the composition;

JNF Handles are designed for 38-44 mm thick door leaves. The mechanism is reinforced with double metal self-levelling springs. Handles with thin 5 mm thick plastic rosettes.

The set includes:

• a pair of handles – left and right; together with 5 mm thick handle rosettes;
• 2 pcs of mounting rosettes (so-called mounting adapters);
• 8x8 mm diameter handle bar;
• 2 pcs M4 through-hole screws;
• 2 hex screws and a 3 mm hex key;
• assembly instructions.

If your door leaf will be thicker than 44 mm, you will need a thicker door installation kit, leave important related information in the order notes, including the thickness of the door leaf. Then the mounting kit will be tailored to your needs.